Coatings
The Key Metric of Battery Production — Overall Equipment Efficiency
- Published: February 06, 2025
By Prof. Dr.-Ing. Daniel Eggerath, Technical Director, Jagenberg Converting Solutions
Chris Clark, VP - Sales and Technology, Faustel
Thomas Lebbing, Managing Director, Jagenberg Converting Solutions
The battery, as an energy storage device, has been an integral part of private and industrial applications for many decades. The areas of electromobility and the stationary storage of electricity have triggered a veritable boom in recent years. Battery production facilities have been, and are being built all over the world.
Global storage requirements are currently estimated at 3000 GWh. The U.S. accounts for an estimated 810 GWh, with around 200 GWh of production capacity installed to date. In practice, this often does not correspond to the total quantity of material produced, as the amount of waste during battery production is often not insignificant due to the high complexity of the manufacturing process.
A characteristic metric for assessing production quality is the so-called OEE value (Overall Equipment Efficiency), expressed using the following formula:
Ideally, 100 percent is achieved here. However, in the battery production environment, systems that achieve 87 percent are currently described as world class.
The situation is even more critical during the ramp-up of the systems. Here, values of 40 percent or less are not uncommon. Thus, large sums of money are swallowed up during this time, as the costs for the active materials in the cathode in particular are very high. The aim is therefore to make the ramp-up phase as effective as possible in order to quickly reach an OEE>80 percent.
How can this time be shortened? There is great potential in commissioning the systems in a close partnership between the end customer and the system supplier. A key factor here is the necessary process knowledge that the machine supplier brings to the table to ensure an efficient and effective start-up of the plant in addition to supplying the equipment. Here, for example, a giga-factory electrode coating system can be considered (Figure 1).
Copper and aluminum foil are coated and dried with corresponding electrode materials in the GEMO highest grades on such machines. Typical web speeds are 70 m/min and coating widths of ~1.2 m. The machine lengths are approximately 100 m due to the required dryer length of approximately 50 m. The coating lines are usually installed under clean room conditions, i.e. ambient temperatures of 22°C and room humidity of ~1 percent. An important parameter that significantly influences the OEE is the uniform distribution accuracy of the coated electrode material on the substrate. Both the front and back of the substrate are coated. The basis weights to be applied can vary, although values of 100 g/ m' per side are not uncommon.
The coating process, which is usually carried out using a slot die, is therefore crucial. On the one hand, precise application is guaranteed by a perfectly manufactured slot die (Figure 3), which means that the outlet gap must be manufactured to an accuracy of less than 1 um. On the other hand, the coating delivery system (Figure 2) must be designed in such a way that there is no accumulation of particles within the slot die and no pulsation of the mass flow, which would lead to linear thickness fluctuations in the direction of web travel.
Another important aspect is the accurate positioning of the slot die, in the micrometer range. Once the distance has been set, it must not change during operation, and it must be consistently reproducible after movement (throw-off). Figure 3 shows an example of such a coating process. In this case, five strips were produced in parallel in the direction of web travel.
The uniform distribution is usually measured using so-called basis weight measuring systems, i.e. the thickness distribution of the coating is measured indirectly via the surface density (g/m?). Various measuring principles are used, such as ultrasound, X-ray, or beta gauge. Which measuring principle is most suitable must be decided on a case-by-case basis according to coating formulation and other factors.
Together, the applied coating precision and the accuracy of the measuring system plays an extremely important role in quality control. If one considers that in some cases uniform distributions of less than +1 percent must be achieved in production, the requirements for the measuring system must be multiplied by a factor of 10, i.e. measuring accuracies of 0.1 percent must be achieved.
The basis weight measuring systems are usually located at different positions within a system, e.g. in wet and dry areas, as well as directly in the area of the base foil or film. Almost all systems face corresponding challenges at the edges, as the measuring spot is in the millimeter range. Confocal laser sensors can help to resolve the edge elevations. The edge elevation is caused by boundary layer processes in the area of the die outlet, as well as capillary and wetting phenomena.
These so-called profilometers are usually placed directly in the wet area of the coating.
Another important aspect is the geometry of the coating. It is not uncommon for several strips to be produced simultaneously, as shown in Figure 3, and on both sides.
For the subsequent processing of the electrode material, it is crucial that the coating preparations do not exceed or fall below certain tolerances, typically in the tenth of a millimeter range. Optical systems are therefore used to maintain the tolerances. In addition to detecting defects, e.g. contamination, they also measure the geometries of the electrodes. In addition to the measuring methods already mentioned, there are many other measuring techniques within such systems to ensure flawlessly produced electrodes.
After understanding the aspects that influence the OEE of electrode production, we can now summarize five key solutions that ensure that the OEE quickly exceeds 87 percent during the commissioning phase:
- Pre-order process trials at a Technology Center to demonstrate the supplier's mission critical technologies, such as slot die coating accuracy and coating delivery system performance.
- Closely coordinated project planning between the machine supplier and the customer throughout the design and production of the machine.
- Continuing process engineering support from the system supplier to solve any process equipment problems during the commissioning phase.
- Flexible and fast-acting system supplier in the event of problems.
- Integrated central data management system for the analysis and optimization of the electrode being produced.
In conclusion, it can be said that the production of a battery electrode poses many challenges. However, these can be mastered effectively by considering all relevant process parameters in partnership between the customer and an experienced equipment supplier, followed with a structured and systematic commissioning phase.
About the Author
Jagenberg Converting Solutions and Faustel are two leading companies in the web converting industry, partnering to provide equipment from R&D scale through complete giga-factory solutions. Faustel's Process Technology Center facilitates collaborative customer product development trials prior to equipment manufacturing. For more information, email This email address is being protected from spambots. You need JavaScript enabled to view it. or This email address is being protected from spambots. You need JavaScript enabled to view it..
How do you ensure reliable silicone coating quality control?
- Published: January 15, 2025
Whether you need real-time process monitoring or precise at-line measurements, Applied Rigaku Technologies offers practical solutions to help you maintain quality and efficiency in your operations.
Ultrasonic Drying of Biodegradable Molded Recycled Paper
- Published: July 01, 2024
This first of a three-part series will discuss a test program conducted by Heat Technologies, Inc.'s Spectra HE UltraTM drying system
Measuring the Coating Window: Simplify the Concept with Mapping
- Published: June 24, 2024
Coating windows are the most useful way to understand what is going on at the coating head.
The Leader in Web Handling Expertise and Innovation
- Published: February 07, 2024
As the only solutions provider with all capabilities in-house, American Roller is proud to be a trusted and dependable supplier of custom cores...
Keynote Speakers Announced for TAPPI’s 2024 FlexPack PLACE Conference
- Published: December 04, 2023
Registration now open for flexible packaging industry event
Suppress Static Sparks to Protect Sensitive Coatings
- Published: October 20, 2023
Static Sparks Cause Thermal Damage Causing Holes or Voids in Thin Coating
Portable Coating Line Provides Flexible, Affordable Option for Testing Coating & Laminating Methods
- Published: October 16, 2023
What are the main uses for the Portable Coater Line?
Ashland Introduces the Easy-Wet™ Substrate Wetting Agent Portfolio
- Published: October 04, 2023
Silicone-free, High-performing Additives for Industrial Coatings Applications
Sun Chemical Employee Receives NAPIM’s Technical Achievement Award
- Published: October 03, 2023
Sun Chemical’s Glenn Webster received the National Association of Printing Ink Manufacturers’ (NAPIM) Technical Achievement Award, one of the most prestigious honors in the ink manufacturing industry.
At SMTA High Reliability Cleaning & Conformal Coating Conference, IDENTCO to Give Presentation on Label Compatibility and Durability Issues
- Published: August 15, 2023
Company offers series of PCB labels with unique material compositions that protect against harsh chemical washes & high temperatures.
Beontag Publishes 2022 ESG Report
- Published: August 15, 2023
Beontag – one of the world’s largest manufacturers of self-adhesives and smart tags such as RFID and NFC
Flint Group Innovation Showcased at CorrExpo 2023
- Published: July 18, 2023
Flint Group Packaging, one of the largest consumable suppliers to the global print and packaging industry
Magnomer’s Magnetizable Inks Earn APR Responsible Innovation Recognition for Recyclability of PET-G Shrink Sleeves
- Published: July 14, 2023
The Association of Plastic Recyclers (APR) has granted Responsible Innovation Recognition to Magnomer Inc. for its Magmark™ SS magnetizable coatings
Corona Treatment for Extrusion Coating and Laminating Production Lines
- Published: June 19, 2023
Plastic and paper processing companies — especially those converting web materials — are confronted every day with the problems of improving adhesion
Sun Chemical Releases Spring 2023 Regulatory Newsletter
- Published: May 11, 2023
Sun Chemical has released its Spring 2023 Regulatory Newsletter for customers which can be downloaded
Release Coatings for Curing Oven Components
- Published: April 25, 2023
With the demand of speed and efficiency in manufacturing, any interruption creates major frustration.
Top Packaging Producer is One of the First to Deploy Pioneering Tension-measurement Roller
- Published: April 25, 2023
In its quest to maintain the highest quality standards, a leading film and packaging manufacturer has turned to the world’s first segmented tension-measurement roller.
Archroma Announces CEO Transition
- Published: April 19, 2023
Archroma, a global leader in sustainable specialty chemicals and solutions for the textiles, packaging and paper, paints and coatings industries, announced
INX International Makes Investment in Gooten
- Published: March 31, 2023
INX International Ink Co. recently announced it has completed an investment agreement in Gooten
Orion Debottlenecks Post-treatment Unit in Germany for High-jetness Carbon Blacks
- Published: March 22, 2023
Orion Engineered Carbons, a global specialty chemicals company, has debottlenecked a post-treatment unit at its Cologne, Germany, plant that produces high-jetness specialty carbon blacks.
Coating Futures in Medical and Wound Management
- Published: March 20, 2023
Though packaging may be the mainstay for many converters, converting is much more.
How a Full Lineup of Coatings Can Transform Packaging
- Published: February 08, 2023
Coatings Enhance Packaging, Enable Sustainability, Engage the Senses, Increase Functionality, Create Impact
Italy’s Majocchi Achieves Exacting Textile Functionality and Aesthetics With Baldwin’s Corona Treatment Technology
- Published: February 08, 2023
Majocchi, a leading Italian textile manufacturer, reports that it has achieved unprecedented functional and visual appeal with its key fabrics
ETI: Empowerment through Innovation
- Published: February 07, 2023
For more than 20 years, ETI has been a trusted partner with players in the narrow-web converting industry.
Orion Sharply Reduces Air Emissions with new Technology at Borger, Texas, Plant
- Published: January 26, 2023
Orion Engineered Carbons (NYSE: OEC), a global specialty chemicals company, has announced it will sharply reduce air emissions at its Borger, Texas, plant with new control technology.
Orion Engineered Carbons Announces New Distribution Partnership with ION Specialties in Mexico
- Published: January 09, 2023
Orion Engineered Carbons, a specialty chemicals company, has entered a distribution agreement with newly formed ION Specialties, based in Mexico City.
American Roller Acquires Big River Roller
- Published: December 14, 2022
Company expands southern presence and expands trucking capabilities
Microhardness Testing Explained: Vickers & Knoop Testing
- Published: November 07, 2022
Microhardness Testing is used to determine a material’s hardness or resistance to deformation when test samples are not suitable for other types of Macrohardness testing.
Flint Group Packaging Boosts North America Business With Key Commercial Appointment
- Published: October 06, 2022
Leading developer of inks and coatings for the Packaging and Label industries, Flint Group Packaging has announced the appointment of Terry Davis as Vice President of Strategic Accounts, Flexible Packaging North America.