Advantages and Disadvantages of Coating Methods

AIMCAL R2R Presentation Preview

In an era when battery technology is advancing at record pace it is important to be sure that battery manufacturing is capable of keeping up. In many cases the accuracy and precision of the coated electrode is what can make or break a new technology. For example, it may be imperative to control the mass of anode or cathode loading to within +/-2 percent or better. Also, with the introduction of new, exotic, and expensive raw materials, it will be important to minimize waste from excess coating or exposure to contaminants. Different type of current collectors used as substrates for electrodes may present difficulties in the coating process. All coating methods are not alike. The electrode coating method should be evaluated to determine whether it can produce electrodes that conform to these high standards.

For instance, can your current coating method produce an electrode with a cross web loading uniformity of better than +/- 2 percent? It may be possible at 100mg/cm2 loading but can it produce that accuracy at 25mg/cm2.

Is the electrode slurry exposed to environmental contaminants during the coating process? This can prevent the leftover fluid from being recycled or reused.

Is solvent allowed to evaporate from the slurry vessel during the coating process? This can cause variation in the slurry make-up which will influence the downstream quality of the coated electrode.

At the AIMCAL R2R Conference, Scott Zwierlein, coating process engineer at Frontier, a Delta ModTech company will be presenting further on this topic. His presentation will address the advantages and disadvantages of a number of coating methods to give you the tools to evaluate which process will best suit your technology.

For more information, stop by Delta ModTech/Frontier LLC at Stand 811, or visit www.frontiercoating.com / www.deltamodtech.com.

Slot Die Coated Electrodes: How to get the highest quality anode and cathode coatings

Check out this upcoming presentation on October 20, at 9:00 AM – 9:25 AM  at the AIMCAL R2R USA Conference co-located with ICEC USA Trade Show.

Presenter Bio

Scott Zwierlein is the coating process engineer at Frontier, a Delta ModTech Company. He works directly with customers to develop solution-based coating and drying equipment. Solutions span a variety of industries, including batteries and capacitors, fuel cells and medical parts. Zwierlein has extensive problem solving experience in the coating industry, he has been with Frontier for the past 20 years, having a background that includes both engineering and R&D. Zwierlein attended the University of Pittsburgh and currently resides in rural western New York with his wife and children. He can be reached at 507-265-2500 or This email address is being protected from spambots. You need JavaScript enabled to view it.

2023 Events

January 24-25 | Elementary Nonwovens Training Course, INDA Headquarters, Cary, NC (inda.org/training)

February 7-10 | Intermediate Nonwovens Training Course, INDA Headquarters, Cary, NC & The Nonwovens Institute, NC State University (inda.org/training)

Feb 28-Mar 3| Introduction to Spunbond & Meltblown Technology, Raleigh, NC (inda.org/training)

March 5-8 | SPE International Polyolefins Conference, Galveston, TX (https://spe-stx.org/international-polyolefins-conference/)

March 20-22 |  AWA Global Release Liner Industry Conference & Exhibition, Denver, CO (https://awa-bv.com/product/grlice22/)

April 16-19 | FORUM 2023, Columbus, Ohio (https://forum.flexography.org/)

April 17-18 | INFOFLEX, Columbus, Ohio (https://infoflex.flexography.org/)

April 26-28 |  Label Expo, Mexico City, Mexico (https://www.labelexpo-mexico.com/)

May 4-10 | interpack 2023, Düsseldorf, Germany (https://www.interpack.com)

May 16-17 | Print & Digital Convention, Düsseldorf, Germany (https://www.printdigitalconvention.de/en)

May 22-24 | AICC Packaging Xperience, Chicago, IL. (www.packagingxperience.com)

May 23-24| Elementary Nonwovens Training Course, Cary, NC (inda.org/training)

June 6-8| Absorbent Hygiene Training Course, Cary, NC (inda.org/training)

June 20-22 | Adhesives and Bonding Expo, Novi, MI (www.adhesivesandbondingexpo.com)

June 20-23| Nonwoven Product Development & Innovation, Raleigh, NC (inda.org/training)

July 17-18| WIPES Academy, Atlanta, GA (inda.org/training)

July 17-20| World of Wipes® (WOW) International Conference, Atlanta, GA (worldofwipes.org)

August 1-4| Intermediate Nonwovens Training Course, Raleigh, NC (inda.org/training)

August 22-23| Elementary Nonwovens Training Course, Cary, NC (inda.org/training)

September 11-13 | Pack Expo Las Vegas, Las Vegas, NV (www.packexpolasvegas.com)

September 11-14 | Label Expo Europe (www.labelexpo-europe.com)

September 12-14| Fiber & Filament Extrusion Fundamentals, Raleigh, NC (inda.org/training)

September 26-27| RISE® (Research, Innovation & Science for Engineered Fabrics), Raleigh, NC (riseconf.net)

October 10-11| Filter Media Training Course, Chicago, IL (inda.org/training)

October 10-12| FiltXPO™ | International Filtration/Separation Exhibition & Technical Conference, Chicago, IL (filtxpo.com)

Oct 18-20 | Printing United, Atlanta, GA (https://www.printingunited.com/)

October 24-27| Intermediate Nonwovens Training Course, Cary, NC & Raleigh, NC (inda.org/training)

November 13-16| HYGIENIX™ | The Premier Event for Absorbent Hygiene & Personal Care Markets, New Orleans (hygienix.org)

December 5-8| Fabric Property Development & Characterization, Raleigh, NC (inda.org/training)

2024 Events

Jan 9-11 | ICEC USA, Orlando, FL (https://www.convertingshow.com/)

 

Exhibitors’ Sneak Peek

Click logos to view