On Print
On Print | Value Proposition for Thermal Transfer: Printed Electronics
- Published: March 09, 2017, By Dene Taylor
Thermal transfer offers a unique set of capabilities that can be applied to advantage in emerging applications, one of which is printed electronics.
On Print | drupa 2016 Lived Up to Expectations
- Published: June 22, 2016, By Dene Taylor
Printing expert Dene Taylor reflects on the recently concluded trade show where digital package printing was a real market focus.
On Print | UV LED Is Beyond the Tipping Point
- Published: January 12, 2016, By Dene Taylor
Anywhere ultraviolet (UV) cure is being considered, light-emitting diode (LED) should be seriously investigated, says printing expert Dene Taylor. This article explains why.
On Print | UV/EB Inkjet for Food Packaging
- Published: May 12, 2015, By Dene Taylor
Dene Taylor, a presenter at RadTech’s UV/EB West 2015, says packaging printed with energy cure inkjet may be coming soon to a supermarket near you
On Print | Digital Printers for Real Converters
- Published: January 05, 2015, By Dr. Dene Taylor
Advances in technology now make it possible for you to handle the move to digital just like you did when bringing in flexo or gravure
On Print | Are You Cured? Proper Cure Is Up to You
- Published: June 23, 2014, By Dr. Dene Taylor
How can you give a 100% guarantee that you will never ship any uncured or under-cured material?
On Print | Measuring Print Quality Within and Across Platforms
- Published: February 20, 2014, By Dr. Dene Taylor
A print quality measurement service provides a method to quantify press performance
On Print | Digital Printing: New Year Resolution
- Published: January 20, 2014, By Dr. Dene Taylor
Resolution for digital devices is a source of confusion. Printing expert Dene Taylor offers advice and resources
On Print | Impact of 3-D Printing on the Converting Industry
- Published: September 27, 2013
As a 3-D printing enthusiast, Dr. Dene Taylor has pondered this question often.
On Print | Finishing & Digital Printing
- Published: August 05, 2013, By Dr. Dene Taylor
To get good ROI for a digital press, not just finishing but also substrate preparation must be part of the total job.
On Print | Conductive Inks & Coatings
- Published: February 22, 2013, By Dr. Dene Taylor
Following the Printed Electronics Conference in Santa Clara, Dene Taylor recaps the practical products for use in our businesses today
On Print | Add Extended Gamut Printing to Your Lean List
- Published: December 18, 2012, By Dene H. Taylor
Replacing spot colors with an extended gamut ink set offers substantial savings in time and materials and eliminates inventories of inks and cylinders or plates.
On Print | Digital Print at Labelexpo
- Published: October 25, 2012, By Dene H. Taylor
The halls were alive with a flush of color, says columnist Dene Taylor, who adds that digital printing for packaging is getting more and more interesting and, indeed, is actually becoming entertaining.
On Print | Inkjet at drupa
- Published: September 04, 2012, By Dene H. Taylor
Folding carton was gold at drupa 2012. The big question: Will flexible film packaging be in the race by drupa 2016?
On Print | Electrophotography for Packaging
- Published: August 07, 2012, By Dene H. Taylor
Toner-based package printing solutions were in action at drupa 2012
On Print | Low Migration UV-Cure Inkjet Inks
- Published: May 22, 2012, By Dene H. Taylor
At drupa, Agfa introduces UV-cure inkjet inks suitable for some food packaging applications but development is needed
Drupa Starts in Style: Landa Intros Web & Sheet Digital Presses
- Published: May 02, 2012
Benny Landa's Landa Corp. makes dramatic debut at drupa2012 with new Nanographic Printing™ Presses.
On Print | Inkjet for Packaging
- Published: March 21, 2012, By Dr. Dene Taylor
Will digital printing dominate or will it be complementary? Our prognosis for packaging is the latter.
On Print | Inkjet and Beyond
- Published: February 14, 2012, By Dene H. Taylor
The merits of digital print technologies are debated at seminars hosted by IMI and AWA
