OMET Press Provides Dual-Shape Labels

Published: July 13, 2017

ELK GROVE VILLAGE, IL | Grafiche Amadeo entered the label business with the purchase of two OMET narrow web flexo presses in three years. The second XFlex X2 was equipped with technical solutions developed at the specific request of the customer. OMET designed a tailor-made solution for the production of dual-shape labels based on the addition of a die-cutting station in-between the flexo units and on an accurate use of the glues.

The eight-color XFlex 370 was designed with a layout that enables the removal of the internal part of the label by cutting and removing it before the stripping unit. The die-cutting unit installed in-between the last two printing groups cuts the shape meant to be removed, without touching the backing, thus preventing the support from being punched.

Andrea Delfino, responsible for label sector at Grafiche Amadeo, says, “After the cutting process, we use a cold foil and a flexo unit to apply a layer of UV glue on the shape already die-cut, to facilitate its removal. The label and the filmic substrate are coupled by means of a nip roll, the UV lamp activates the glue, and the removable shape sticks to the plastic film that strips it away. The following steps consist of traditional die-cutting and matrix rewinding to obtain a special label with both internal and external die-cutting shapes. Thanks to OMET technology implemented on XFlex X2 and to a wise substrate handling, the working speed of this press can reach 130 meters per minute.”

Company says the application of a layer of “glue killer” under the shape to be removed is a crucial step for the success of the entire job. When the adhesive material is separated from the backing, this particular substance is spread onto the area corresponding to the removable shape, weakening the strength of the glue in order to facilitate the stripping process. Without this special “glue killer,” the maximum printing speed reportedly would be much slower.

OMET had already integrated this special configuration with the die-cutting unit in-between two printing groups on an XFlex X6 fully automatic and high-performance machine. However, Grafiche Amadeo’s X2 is the first machine to implement this application on a completely mechanical platform.

OMET’s products will be on display at Labelexpo Europe 2017, September 25–28, at the Brussels Expo in Brussels, Belgium.

This email address is being protected from spambots. You need JavaScript enabled to view it.