Trim Removal

Products

(Magazine)

April 29, 2004, ... of cartons; a third axis option that can be used to fold front and back of simplex-style trays; and a belted, six-corner folding unit to prevent scuffing by using a belt to fold carton. Convey Trim ...

Fast & Flawless

(Magazine)

April 29, 2004, ... fpm with maximum rewind and unwind diameters of 30 in. It is capable of trimming using shear, razor, or score-cutting methods. The 3038 slitter/rewinder is designed to operate with a range of substrates, ...

Zapping Static

(Magazine)

April 29, 2004, ... results with Simco's static elimination systems. Converters know the host of problems static electricity can cause in their processes. Specifically during slitting, static charges can cause trim fragments ...

Drupa New Product Digest

(Magazine)

March 30, 2004, New from: AB Graphic Intl., Ashe Converting, AVT, Bimec, Bobst, Creo, Curioni Sun, DiMS!, Esko-Graphics, F&K, Flint Ink, Futec Europe, GEW, Gidue, Gietz, GMG, Heidelberg, KBA NA, Kodak Polychrome Graphics, ...

CEMA Slitting and Rewinding Seminar Enables Converters to Tap into Production Expertise

(News | New Products)

March 23, 2004, ... equipment will take attendees step-by-step through the best-practice techniques in such areas as winding and slitting, cores and cutting, and trim removal and differential winding. "It is structured to ...

AIMCAL Awards, Page 2, PFFC, March 2004

(News | New Products)

February 29, 2004, AIMCAL recognizes winners of its annual competition for opening new markets and for technological superiority. Produce [Aisle] Results In the Label: Retail category, PROMA Technologies, Franklin, MA, ...

The Family Breadwinner

(Flexpack)

February 28, 2004, AIMCAL recognizes winners of its annual competition for opening new markets and for technological superiority. A metallized bag is nothing new on supermarket shelves. But when it was introduced to the ...

Advanced Vision Technologies to Focus on Industrial Solutions for Converters at Drupa

(News | New Products)

February 26, 2004, ... place a mark on the web at pre-determined intervals. These marks can be numbers or bar codes printed in the trim area, on the reverse of the web, or self-adhesive labels that are applied to the web. When ...

Darwin Would Approve

(Unprinted Rolls)

January 30, 2004, ... trim. Today, the industry makes flexible packaging materials, labels, decals, printed circuits, and an array of metallized plastic and paper products that were unimaginable a half century ago; all were ...

Products

(Magazine)

January 30, 2004, ... dependability, manufacturer notes. Systems can be integrated in many types of aligning, trimming, or slitting operations. Winder Line Is Expanded Davis-Standard, Pawcatuck, CT; 860/599-1010; davis-standard.com ...

Packaging Professionals Click with Nilfisk-Advance America on New Web Site

(News | New Products)

January 22, 2004, ... such as collecting lateral trim and scraps. Key site features include: Industry-Specific Section features packaging and manufacturing news, product recommendations and information, literature authored ...

There's a Duck in My Duct

(Magazine)

December 30, 2003, Duck tape generally is a clear plastic film using an equally clear polyacrylate pressure-sensitive adhesive. It has use in packaging and protective applications. Duct tape frequently is a gray cloth-like ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

December 30, 2003, Personnel in the converting and packaging industries will want to obtain the fully searchable “1995-2003 TAPPI PLACE Conference Proceedings Anthology CD-ROM.” Providing practical information to the converting ...

Products and Materials

(Magazine)

December 30, 2003, ... up to 16 printheads. Convert Waste into Bricks Precision AirConvey, Newark; 302/999-8000; precisionairconvey.com Briquetting system converts trim, loose scrap, and other flexible plastic waste into ...

Dual-Deckle System for Trouble-Free Web Width Variation

(The Place)

November 30, 2003, ... is not always easy. The common problem of edge bead — an increased thickness along both edges of the coating — makes trimming the edges to meet product specifications necessary. Edge bead is particularly ...

Products

(Magazine)

November 29, 2003, ... AirConvey, Newark, DE; 302/999-8000; precisionairconvey.com In-line repelletizing system enables plastic film processors to capture edge trim and roll scrap, convert it to pellets, and re-introduce it ...

Corona Collaboration

(Tapes)

October 31, 2003, Label Technology provides input to Corotec Corp. to improve its corona treater design and its productivity. Label Technology provides input to Corotec Corp. to improve its corona treater design and its ...

Cast Film Lines for Barrier Films

(The Place)

October 31, 2003, Application: Besides the blown film process, cast film technology is the most significant production method for manufacture of barrier films ranging from 20 to 300 microns. The number of layers, the selection ...

Auto Industry Applications Drive P-S Tape Markets

(Magazine)

October 31, 2003, ... and noise reflection (NVH), and interior trim fastening applications. While European auto production has slowed overall due to the adverse economic climate, the outlook is optimistic, with today's opportunity ...

Converting Equipment Mfrs. Assn. Sets Slitting/Rewinding Seminar in Philadelphia This Fall

(News | New Products)

October 23, 2003, ... 12, 2003 8:00 - 8:15 am—Day Two Introduction Ron Schmidt, Maxcess Intl. Corp. 8:15-9:10 am—Trim Removal Ken Erskine, Quickdraft 9:10-10:05 am—Differential Winding Products and Practices Sean ...

Inspection Perfection

(Flexpack)

October 08, 2003, Ultra Flex Packaging Corp. sees customers’ acceptance soar with AVT’s Apollo system on its slitter-rewinders. Ultra Flex Packaging Corp. sees customers’ acceptance soar with AVT’s Apollo system on its ...

Spartanics to Premiere Die Cut, Color Match Products at Graph Expo

(News | New Products)

September 18, 2003, ... what is acceptable or unacceptable. New Lasor Senor Autocutter Spartanics says it will showcase its lasor sensor M95 Autocutter too. "Automated trimming and the cutting of sheets being ...

Pay Attention to Tension

(Archive)

August 31, 2003, ... slitting the wide input material into the output slit strands and trims. Third, transporting the slit web to the winding cores (and to the trim take-away system). Fourth, winding good slit rolls with proper ...

A Look at Adhesion Increase in Pressure-Sensitive Adhesives

(Tapes)

August 31, 2003, Last month, this column addressed the subject of permanent and removable pressure-sensitive adhesives. A prime consideration in the difference between Last month, this column addressed the subject of permanent ...

Europe: Label's Leade

(Tapes)

August 31, 2003, ... in brand numbers through pan-European and global branding and in brand inventories will direct activity into supply chain management and logistics — to the continued detriment of print-run length.  ...

Materials

(Materials)

August 31, 2003, New from: Ampacet Sales, InteliCoat Technologies, Kraton Polymers, MetalFX Technology Ltd., National Adhesives, Pliant, Thibierge & Comar Papetiers, and Toray Plastics. Substrates, Inks, Adhesives, Polymers ...

Products

(Magazine)

August 31, 2003, New from: Amacoil, Amplas, Appleton, Bosch Rexroth, Bunting, CMC Cevenini, Contech, ControlAir, Conversource, Convertech, Daetwyler, Davis-Standard, Dusenbery, Dynaspede, EDI, EGS, Enercon, Exair, Flexo ...

Converting Industry News

(Magazine)

July 31, 2003, ... is projected to increase almost 4%/yr to $1.1 billion in 2006. Make sure to weigh all of the options before diving into purchasing a trimming machine as they can be quite expensive, a good collection can ...

Permanent & Removable Pressure-Sensitive Adhesives

(Magazine)

July 31, 2003, An intriguing aspect of pressure-sensitive adhesives is the wide variety available. They come in different forms for application as solutions in solvent, An intriguing aspect of pressure-sensitive adhesives ...

Tidland's New Raptor Chucks Take a Bite Out of Downtim

(News | New Products)

July 10, 2003, A new chuck design unveiled by Tidland is easy to use and maintain, without the core damage usually associated with shaftless applications, reports the Maxcess Intl. co. According to Tidland Corporation, ...