Search
- A Recipe for Flexo Printing Success
- (Flexpack)
- May 30, 2004, ... the cut width and repeat tolerances are to give the mounter an acceptable tolerance with which to work. Does the job require a sleeve? If so, what is the sleeve thickness and width? Does this particular ...
- New Products for the Converting Industry, PFFC, June 2004
- (Magazine)
- May 30, 2004, ... or magnetic mounting hardware is attached easily by most conventional methods. Available in two thicknesses: SF (firm) and SS (soft). Spool In-Line to Save Space Amacoil, Aston, PA; 610/485-8300; amacoil.com ...
- Products
- (Magazine)
- April 29, 2004, ... mechanism that eliminates the need to reset the flexible-lip bolts or install an alternate lower lip with each change in product thickness. Company reports the patented Toggle FastGap system now also eliminates ...
- When Rollers Fight, Webs Lose
- (Archive)
- March 31, 2004, ... proportional to the side-to-side strain change and the web's modulus and thickness. A 10-mil edge-to-edge tram error over a 10-in. span will cause a 0.1% strain change. Multiplying the strain change by ...
- Products
- (Magazine)
- February 29, 2004, ... 2000 rod coater is said to be affordable, simple, and flexible, while adding quality control and easy cleanup. Coating thickness or coat weight is adjusted easily. Coater is compact and offers the ability ...
- Fun with Force Gauges
- (Magazine)
- February 28, 2004, ... is the change in stress (force/thickness/width) over the change in strain (percent change in length). This test isn't accurate enough for foils or thicker products, but it can estimate modulus within 20% ...
- G Prime A Rheological Indicator to Predict the Extrusion Coating Performance of LDPE
- (The Place)
- January 31, 2004, ... stress melt rheometer. Polymer pellets were melted, compressed, and cut into discs with a diameter of 25 mm and a thickness of 1 mm. Parallel plates were used for measurements under a nitrogen atmosphere. ...
- Products
- (Magazine)
- November 29, 2003, ... into the extrusion process via a gravimetric blender. Will process PE, PP, PS, ABS, metallocenes, coextrusion blends, and more in a wide range of trim widths and thicknesses at rates to 700 lb/hr. Vertical ...
- Cast Film Lines for Barrier Films
- (The Place)
- October 31, 2003, ... of polymers, the layer configuration, and the thickness of the individual layers depend on the intended film use. PEER-REVIEWED TECHNICAL PAPER: Following is an expanded summary of a complete paper available ...
- Coating Success
- (Unprinted Rolls)
- September 30, 2003, ... applicators, and no one method is suitable for all requirements. Each coating method has an optimum range of wet coating thickness, line speed, viscosity, etc., in which it will produce defect-free film. ...
- Measure Pressure with Thin Film
- (Magazine)
- April 30, 2003, ... application is 41 deg F to 95 deg F (5 deg C to 35 deg C), but some material can withstand much higher temperatures for brief exposures. Use of Film Offered in thicknesses from 4 mils to 20 mils, these ...
- AIMCAL Winners Pulsate with Panache
- (Corrugated)
- March 31, 2003, ... board for the top and bottom rims. The rims are folded over to achieve a 24-pt thickness and provide a seamless rim with a duplex effect. To maintain maximum strength and ensure smooth and crack-free folds, ...
- Filtration Transformation
- (Magazine)
- February 28, 2003, ... In addition to its coating equipment, GLCL utilizes a web cleaning system from Teknek, an NDC Infrared gamma backscatter-gauging system (for thickness measurement), and a sheeter supplied by Rosenthal. ...
- A Well-Balanced Process Line
- (Magazine)
- December 31, 2002, ... wall thicknesses were both homogenous and uniform, this unbalance might not be a factor. To maintain a credit side to our financial ledger, minimal maintenance practices are required. A properly balanced ...
- Controlling Coater Gap Uniformity
- (Magazine)
- October 31, 2002, ... Since there is a direct relationship between setting the width of the slot gap and the thickness of the coating material, it is critical for manufacturers to set a very uniform gap along the full length ...
- What Is the Role of Tack in Printing Inks?
- (Magazine)
- September 30, 2002, ... at known ink film thickness, temperature, and speeds. The basic principle is that several rollers, one of which is driven, rotate with an ink film of known thickness between them. The second roller ...
- Well Done Tension
- (Magazine)
- August 31, 2002, ... just the right burner setting or quantity of charcoal. He knows how many minutes to cook per side based on thickness and cut of meat. His method works great for him, but without his skill and knowledge ...
- Products
- (Magazine)
- August 31, 2002, ... The K Control Coater produces quick, accurate, and repeatable samples to determine the thickness of the adhesive coating in quality control, for production runs, and for presentation purposes, the mfr. ...
- 1950s
- (News | New Products)
- August 27, 2002, ... for acetate, increasingly popular PE, and other films of thicknesses from .001-inch to .020 inch. July 1951 The Envelope Manufacturers Convention hosts “The Envelope Follies of 1950,” a musical featuring ...
- Products
- (Magazine)
- July 31, 2002, ... roll. The EchoKote Junior is designed for gravure or direct application of materials from the laser-engraved ceramic roll. Coating thickness is to 13 microns or 8.7 lb/3k sq ft at 100% solids. Crossfolder ...
