Heat Transfer Fluid

CTC Announces New Heat Seal Splicer

(News | New Products)

April 03, 2017, Said to make virtually undetectable butt splices, the new unit offers non-stop production and a compact footprint WEST CALDWELL, NJ | CTC International introduces a new heat seal butt splicer said ...

On Print | Value Proposition for Thermal Transfer: Printed Electronics

(On Print)

March 08, 2017, Thermal transfer offers a unique set of capabilities that can be applied to advantage in emerging applications, one of which is printed electronics. Thermal transfer offers a unique set of capabilities ...

Coating Matters | Computational Methods Beyond Fluid Flow Analysis

(Coating/Laminating)

December 06, 2016, ... But the use of FEA is not limited to understanding fluid flow. It also can be utilized to determine the structural strength of the equipment and the temperature effect of a heated slot die. Outside of ...

Coating Matters | Pre-Metered Fluid Flow Analysis with Computational Methods

(Coating/Laminating)

November 27, 2016, By taking a finite section of fluid flow within a slot die, one can understand the flow as it is affected by a number of factors. By taking a finite section of fluid flow within a slot die, one can ...

Toray Announces New Metal-Transfer Film

(Coating/Laminating)

November 21, 2016, New Lumirror MR20 is called an eco-friendly, super-bright, cost-effective metal-transfer PET film for decorative packaging and printing applications NORTH KINGSTOWN, RI | Toray Plastics (America) exhibited ...

Toray Metal-Transfer Film Is Bright and Green

(Flexpack)

September 05, 2016, Lumirror MR20 PET film is said to be well suited for decorative packaging, to be cost-effective, and to help the environment as well NORTH KINGSTOWN, RI | Toray Plastics (America) announces Lumirror ...

Coating Matters | Fluid Delivery System Design for Coating Control

(Coating/Laminating)

May 23, 2016, ... pump is great for many positive displacement applications, but it fails for many UV curable fluid systems. UV curable fluids can cure due to light energy, heat, or shear. The shear imposed by the gear ...

Catbridge Debuts Turret Cutoff/Transfer System

(News | New Products)

February 23, 2016, Part of the company’s 300-MC Series, the new turret cutoff and transfer system is said to control alignment precisely PARSIPPANY, NJ | Catbridge Machinery has developed a turret cutoff and transfer ...

Coating Matters | Clean Coating and Fluid Preparation

(Coating/Laminating)

February 15, 2016, When you are concerned about cleanliness of a finished product, the best place to start is at the beginning. If you'd like to hear from Mark Miller's own lips rather than read his column, titled "Coating ...

EqualAir System Reduces Plant's Heating Bil

(News | New Products)

October 04, 2015, Air and Water Systems unit moves higher heat at ceiling to floor level CHARLOTTE, NC | Air and Water Systems introduces EqualAir, a low-energy heating system for industrial, commercial, and warehouse ...

AWA Workshops Cover Heat Shrink Sleeve Label Technology

(Label/Tape)

June 15, 2015, ... that its 2015 portfolio of professional events related to sleeve labeling technologies continues with the interactive Introduction to Heat Shrink Sleeve Label Technologies Workshops, July 21–22 July and ...

Flint Announces Heatset Blanket

(News | New Products)

December 28, 2014, The dayGraphica 4600 heatset blanket is said to provide higher press uptime in several ways   PLYMOUTH, MI | Flint Group has launched the dayGraphica 4600 heatset blanket, said to address three main ...

Stepwise Process Fluid Coating

(Coating/Laminating)

November 17, 2014, After a fluid is deposited onto a substrate anything can happen. While the fluid is balancing on the substrate and traveling to the curing section of the process, what will the fluid do? If you'd like ...

Coating Matters | Patch Coating for Precision Fluid Placement, Pt. 2

(Coating/Laminating)

October 20, 2014, Intermittent coating continues to be a growing field in the world of slot die coating technology in general, and the flexible electronics and energy storage industries in particular. If you'd like ...

Optimization of Fluid Coating

(Coating/Laminating)

October 16, 2014, Developing a product in the fluid coating industries requires determination of raw materials to provide for the differentiated features of the product, but equally important is the process development ...

Coating Matters | Patch Coating for Precision Fluid Placement, Pt. 1

(Coating/Laminating)

September 22, 2014, ... None of which is allowable in energy storage devices. This current distribution variation is recognized, in the worst case, as a spike in energy with runaway heat. Heavy edges increase battery cell volume ...

Fighting Viscous Forces to Improve Fluid Coating Success

(Coating/Laminating)

September 17, 2014, When it comes to slot die fluid coating, the mathematical equations that dictate flow are fundamental, but the details are complicated. The goal with understanding the math should be not to make things ...

Particles in Fluid Coating

(Mark's Coating Matters)

August 11, 2014, ... then the final coated density will vary for the battery. With a varied coat density comes a varied energy density. This can develop into hot spots in the battery and potentially run-away heat that can ...

AWA to Offer Manual for Heat Shrink Sleeve Labels

(Label/Tape)

June 18, 2014, Manual will include nine test methods and cover a number of topics relating to this fast-growing labeling technology   AMSTERDAM, THE NETHERLANDS | AWA Alexander Watson Associates announces the “Heat ...

Polysack to Offer Demo at Heat-Shrink Sleeve Label Event

(Label/Tape)

June 02, 2014, ... at the Introduction to Heat-Shrink Sleeve-Label Technologies Conference to be presented by AWA Alexander Watson Assoc. June 24–25, 2014, at the Crowne Plaza Hotel in Plymouth, MN. The interactive workshop ...

CSW Offers Ink Transfer Solution

(News | New Products)

May 03, 2014, WhiteFX is said to help solvent-based flexo web printers achieve a smoother, more uniform white ink laydown on transparent film   LUDLOW, MA | CSW offers WhiteFX Ink Transfer Solution, said to help ...

Coating Matters | Designing Equipment for Fluid Flow

(Coating/Laminating)

April 22, 2014, In premetered coating, a slot die is the control valve that turns fluid flow through a pipe into a precise, flat, and even coating on a continuous substrate. How does a chunk of metal do this? If you'd ...

Coating Matters | Under Pressure: The Damage Stress Can Do in Fluid Coating

(Coating Matters)

March 24, 2014, Where does stress come from, and what can it do to a perfectly good coating? If you'd like to hear from Mark Miller's own lips rather than read his column titled, "Coating Matters | Under Pressure: ...

Top Five Things To Remember in Fluid Coating

(Coating/Laminating)

February 17, 2014, The development of coating, curing and converting for the fluid industry leads the individual process engineer in the direction of choices within boundaries. Do your operational choices allow for the future? ...

Heat Technologies Introduces App to Assist Converters

(Flexpack)

February 03, 2014, Aids in understanding how much ink or coating is laid down and more ATLANTA, GA | Gene Plavnik, president of Heat Technologies Inc., reports the company has just introduced an iPhone app, HTI Anilox. ...

IIMAK Releases Resin Thermal Transfer Ribbon

(Label/Tape News)

November 03, 2013, SP575 Resin Thermal Transfer Ribbon is said to stand up against harsh chemicals and severe abrasion, making it well suited for automotive labels   AMHERST, NY | International Imaging Materials (IIMAK), ...

ROI for Fluid Coating Technology

(Coating/Laminating)

July 28, 2013, Cost of ownership and return on investment are critical in the decision of fluid coating technology for a converting industry product. If you'd like to hear from Mark Miller's own lips rather than ...

Coating Matters | Fluid Flow Phenomena

(Coating/Laminating)

May 14, 2013, Faster and thinner coatings are the wave of the future—learn how to ride the wave to success! If you'd like to hear from Mark Miller's own lips rather than read his column titled, "Coating Matters ...

Demand for Heat Shrink Sleeves Still Hot

(Shrink Sleeves)

May 07, 2013, Market demand for heat shrink sleeve labels continues to grow ahead of other label decorating systems with Asia setting the pace. A podcast with Cory Reardon of AWA Alexander Watson Assoc. gives details. ...

AWA Presents Workshop on Heat Shrink Sleeve Labels

(Label/Tape News)

April 30, 2013, ... of sleeve label workshops: Introduction to Heat Shrink Sleeve Label Technologies Workshop, June 11–12, Plymouth, MN. Called an all-round essential briefing, the workshop is supported by leading industry ...