Heat Transfer Fluid

Materials Are for Thermal Transfer Applications

(News Eclips)

July 20, 2008, ... and manufacturing services for flexible materials, custom converts materials for thermal transfer applications. These materials must effectively redirect heat from a heat source to a heat sink, preventing ...

Mixer Combines High Intensity With Low Shear and Heat

(News Eclips)

May 04, 2008, NEW CASTLE, PA | Xaloy is introducing nXmix, a step-change advance in technology for dispersion of additives and fillers in thermoplastic polymers NEW CASTLE, PA | Xaloy is introducing nXmix, a step-change ...

Two-Roll Heated Laminator with Unwind/Rewind

(Archive)

November 25, 2007, ... feedback system. The heated laminator accommodates two 250 mm diameter x 750 mm face rolls mounted in precision roller bearings. The top cotton or denim filled roll has a ground finish. The bottom chrome ...

Heat Wave

(Magazine)

September 30, 2007, ... “These sandwiches are prepared in a specially designed microwavable paperboard tray that uses our revolutionary QuiltWave active microwave packaging to heat the bread to a soft and warm consistency, while ...

Esko-Graphics Transfers Ownership, Packaging Activities to Axcel

(Archive)

September 24, 2005, Esko-Graphics announces that its shareholder, Kirkbi A/S, has entered into an agreement with Axcel to transfer the ownership and all packaging-related activities of Esko-Graphics to Axcel. The transaction ...

CYRO Presents Heat-Aging Effects on Medical Packaging Materials at ANTEC in Chicago

(Archive)

June 01, 2004, Medical packaging engineers, device manufacturers, as well as other attendees of this year's ANTEC conference may now have a better understanding of the effects of heat and sterilization on rigid medical ...

Producing Coextruded High Barrier Heat-Shrinkable Packaging Films

(The Place)

September 30, 2003, ... and comparing high barrier polymers and structures provides guidelines for matching film performance with application. The manufacturing process for high barrier heat-shrinkable packaging films is the ...

Solving the Problem of Silicone Transfer

(Magazine)

September 30, 2003, ... reaction and heat. However, even today, state-of-the-art silicone chemistry cannot achieve a full 100% cure of the siliconized surface layer. Directly following the siliconization process — when the ...

Appleton Launches Line of Thermal-Transfer Security Papers for On-Demand Labels

(News | New Products)

May 18, 2003, Appleton recently announced the development and release of a new line of thermal-transfer label security papers that include its TechMark taggants and Read/Write threads. APPLETON, WI, USA—Appleton recently ...

Transferring HR Data to US from EU May Hit a Snag

(Magazine)

March 31, 2003, It may surprise some members of the converting industry with subsidiaries in the European Union that the EU's framework Data Directive and implementing national legislation could restrict the transfer ...

Focus on Crosslinking in Fluid Ink Systems

(Magazine)

May 31, 2002, ... These inorganic additives react with resin and substrate carboxylate groups to provide zinc or zirconium ion links, which result in higher heat and alcohol resistance. Such additives commonly are used ...

Graphics of the Americas 2002: Business Heats Up in Miami

(News | New Products)

February 24, 2002, ... It seems, however, with the onset of the new year and its first printing industry trade show, business is heating up. It may not quite be at a rolling boil, but according to companies like Heidelberg, ...

Control of Adhesion and Removal of Heat Sealable Tops on Polymer Containers

(Magazine)

December 31, 2001, ... two polymer surfaces by forcing them into intimate contact while they are in at least a partially molten state. Failure of a heat seal bond always initiates at the weakest point. This can be adhesive failure, ...

Kurz Transfer Products and General Roll Leaf Expand Partnership

(News | New Products)

August 26, 2001, Kurz Transfer Products announces an expanded partnership with General Roll Leaf. According to the co., General Roll Leaf has long offered Kurz foils as an integral part of its product line, but an expanded ...

Assessing the Potential for Ink Transfer and Migration

(Magazine)

June 30, 2001, Potential transfer…depends on many factors, such as degree of cure, ink adhesion, pressure between cups, length of time in contact, etc. Recently, I received an e-mail in which a reader questioned ...

Pellet Transfer: Preventative Measures Employed to Reduce Streamer Formation

(Magazine)

April 30, 2001, ... and fittings. This sliding action produces frictional heat that can cause the pellet to melt and smear along the walls of the transfer pipe. The melted smear can release from the walls of the pipe creating ...

Air Gap Dynamics: Effect on Molecular Properties and Heat Seal

(Magazine)

December 31, 2000, ... dynamic factors such as heat, oxidation, shear, and time on the mechanical, physical, and processing properties of polyethylene extrusion coatings. The study used a polyethylene having a melt index of ...

Some Causes of Blocking in Heat Seal CoatingsPart II

(Magazine)

October 31, 2000, Last month this column covered some causes of blocking when using heat seal coatings. The problem primarily addressed concerned processing conditions Last month this column covered some causes of blocking ...

Common Causes of Blocking in Heat Seal CoatingsPart I

(Magazine)

September 30, 2000, Heat seal coatings are formulated materials that are applied to a substrate on a coater and then wound into a roll. In a subsequent operation, the coated Heat seal coatings are formulated materials that ...

Electrically Heated Rollers Are Top Technology Choice

(Magazine)

March 31, 2000, The Thermalon line of electrically heated rollers from American Roller Co., Union Grove, WI, has won the 2000 Technology of the Year Competition sponsored The Thermalon line of electrically heated rollers ...

Ceramic heater rollers an exciting new alternative.

(Magazine)

July 31, 1995, New heater roller technology is reportedly yielding reduced warmup and temperature-recovery times while reducing maintenance downtime and improving process New heater roller technology is reportedly yielding ...

Reynolds subsidiary in Spain benefits from technology transfer

(Magazine)

May 31, 1995, Grafiba SA, a subsidiary of Reynolds Metals Co., started as a manual converter of paper bags and has grown into one of the first firms in Spain to use Grafiba SA, a subsidiary of Reynolds Metals Co., started ...

INX promotes seven Executives to Vice President positions

(News | New Products)

April 16, 2025, INX International Ink Co. has announced the Board of Directors has approved the promotions of seven key people to Vice President positions. INX International Ink Co. has announced the Board of Directors ...

Advantages of Shear, Razor and Crush Web Slitting Techniques

(Coating/Laminating)

April 16, 2025, ... for thin films and foil materials. It is generally easy to set up, and the blades are inexpensive and simple to replace. However, razor slitting has challenges, including heat buildup and a short blade ...

Fedrigoni Announces New Slitting Center for Self-Adhesive Labels in Germany in Q4 2025

(News | New Products)

April 15, 2025, ... of the site became recycled material for the new buildings. Heat pumps have also been installed, powered by electricity generated by photovoltaic systems on the roofs of the warehouses. Thanks to this ...

Advancing Label Innovation Through Collaboration

(News | New Products)

April 15, 2025, ...  Embellishing techniques such as foil stamping or embossing help CPGs stand out on the shelf, but require materials with specific heat tolerances. Suppliers can help converters stay ahead of market trends ...

CT Manufacturer Leads Global Green Packaging Industry

(Coating/Laminating)

April 10, 2025, ... at PACT, LLC. “Lithium battery fires generate extreme heat and usually have to smolder out on their own after hours or even days, all while releasing toxic gas and black smoke into the atmosphere which ...

Nordson Divisions Collaborate to Achieve Unprecedented Flat Profile Time

(Coating/Laminating)

April 09, 2025, ... Prodigi™ die, manufacturers can achieve a flat profile in a fraction of the time compared to traditional heated bolt heads. Specifically, it takes about 30 to 40 seconds to achieve a flat profile with ...

Preventing Static Defects in Digital Printing

(Surface Prep)

April 06, 2025, ... Sheet just before it reaches the Printhead. The Thermal Transfer Printhead in Figure 2 has many, small Heated Pixels. When the Heated Pixel is hot, dye from the Donor Ribbon transfers to the Receiver ...

adphos Hosts Expert Workshop on the Future of Coil Processing

(News | New Products)

April 02, 2025, ... customer delivery, where attendees witnessed the precision, efficiency, and environmental advantages of aNIR® technology in action. By enabling targeted, energy-efficient heat application, aNIR® significantly ...