Drying

About Cold Seal Adhesives

(Magazine)

December 30, 2005, ... a drying operation to remove the aqueous vehicle. Because the dried adhesive has no tack, it can be rewound. The material then is converted into its final application. Cold seal adhesives are used in ...

New Products

(Magazine)

December 30, 2005, ... trapping properties while maintaining the strengths and advantages of the existing standard and premium MFX silver inks. Also said to retain brilliance level even when overcoated. This conventional drying ...

A Communication from the PLACE Div. of TAPPI

(Magazine)

December 21, 2005, ... a hot air dryer to dry a primer coat. The one-sided, aqueous coating has a low solids content that must dry in limited space. The most effective and compact drying devices use high-velocity air impingement ...

New Products

(Magazine)

November 29, 2005, ...  The Speed-Dri Model 3620 IR heater provides instantaneous IR and convection technologies to dry ink printed on target areas to 1 in. wide. Ink drying system is designed for easy installation, low operating ...

Converting Industry News

(Magazine)

October 30, 2005, ... an in-line coating unit, and a double drying extension. This is followed by six more printing units, a second in-line coating unit, and another double extension for drying. Utah Paper Box produces ...

To Serve & Protect

(Magazine)

October 30, 2005, ... If a PVDC coating is to be used as a heat seal coating, what heat seal capabilities are required? Consider the drying capability of the coating or laminating line. PVDC latices are supplied at 45%–60% ...

Pilot/Lab/Technical Facilities

(Magazine)

October 30, 2005, ... dryers, IR drying, corona treatment, laminating, heat bond laminating, priming, printing, unwind/rewind trials, winding (differential, center, surface, center/surface), slitting, Steamex remoisturization, ...

Narrow Web New Products

(Magazine)

October 30, 2005, ... Sorocaba, Brazil; +55 (15) 32233332; etirama.com The FS2540 Premium CI press is a newer version of the Flexorama 250. Features include a bigger central drum; more efficient drying between colors; automatic ...

An Exercise in Compliance

(Magazine)

September 29, 2005, ... might be cut away because of damage before using it in a run require tracking by recording their weight. Solvent evaporated during the drying step of a coating that is legally exhausted into the atmosphere ...

POP Goes the Platemaker

(Magazine)

September 29, 2005, ... a print controller and RIP, a fully automated loader, the press and drying unit, and an automated unloader. At the heart of the Scitex Vision CORjet Premium is the Aprion inkjet technology that uses ...

Converting Industry News, Part 1

(Magazine)

September 29, 2005, ... and nonstop unwind and rewind with flying splice at full speed. The press reportedly also offers high-efficiency drying for water-based inks, auto preregister control, chambered doctor blades with auto ...

Reporter Clips

(Magazine)

June 29, 2005, ... Label; Rick Olszewski, VP/GM of Fasson Roll North America; and Rick Mix, technical director of the FTA. Topics include the printing process; curing and drying; 100% inspection and automated flagging; ...

A Communication from the PLACE Div. of TAPPI

(Flexpack)

June 29, 2005, ... a broad range of application use. Because they use water, they will freeze and can exhibit drying and foaming issues. Their appearance is usually translucent to opaque, and they will generally have lower ...

COF in Printed Packaging

(Magazine)

June 29, 2005, ... itself. If the ink is harder than the substrate, the COF of the printed substrate will be lower than that of the substrate itself. If the COF changes with time, drying, lubricant, or solvent migration ...

New Products

(Magazine)

June 29, 2005, ... machine, is said to guarantee efficiency. Also features high-efficiency drying chambers. Web length is from 850–1,650 mm. Perfect Alignment With Cutter JTW Intl., Lawrenceville, GA; 678/442-0633; ...

18 Ways to Cut Coating Costs

(Magazine)

June 29, 2005, ... If possible, increase the solids content of the mix to reduce the drying load and speed up the web. If an organic solvent system is used, another benefit is the reduction in solvent consumption and savings ...

New Products, Part 2

(Magazine)

May 30, 2005, ... low-temperature thermal cracking in the absence of air and utilizes the output to produce electricity. System includes feeding unit, reaction unit, distillation unit, sludge extractor/drying unit, circulation ...

Odor & Exempt Solvents

(Magazine)

May 30, 2005, ... one has broader appeal due to its solvent power and drying characteristics. It remains to be seen how well we can formulate inks and coatings using some of these exempt VOC solvents, but as with water-based ...

Give Customer What He Wants

(Magazine)

May 30, 2005, ... weight, changes in the drying temperatures used during a run, alternate nip temperatures used with laminating adhesives, etc. Everything must always be the same. Experimentation when filling an order ...

Tech Specs

(Magazine)

April 29, 2005, ... control, sleeves on print and anilox, non-stop unwind and rewind, high efficiency drying for water-based ink, auto pre-register control, doctor blade with auto clean, video inspection and web guide, user-friendly ...

Converting Industry News

(Magazine)

April 29, 2005, ... A full range of colors is available, as well as thermal and IR drying processes. The slitter reportedly has saved the company time and money by increasing throughput. SUPPLIER NEWS New IP Business ...

A Look at Laminating Inks

(Magazine)

April 29, 2005, ... of solvent inks is better. Water-based inks benefit from in-line corona treatment with improvement in press speed. This is due to the better and faster flowout providing a more even and faster drying ink ...

Pilot Coating Offers Versatility

(Archive)

April 06, 2005, ... dryer. The airflow and temperature can be carefully monitored within each drying zone to allow a high degree of process control. Multiple coating methods—such as post metered, direct die, gravure, reverse ...

Which Ink for Which Substrate?

(Magazine)

March 30, 2005, ... is limited. The usual characteristics to test are ink adhesion, drying rates for the particular press, the correct COF for machinability, and various end-use resistance requirements. Test samples need ...

Advances in Coating

(Magazine)

March 30, 2005, ... aspects of the web coating process. His expertise is in the coating and drying of thin films, coating process development and scale-up, polyester base development, film defect mechanisms, and defect characterization ...

New Product Digest, Part 2

(Magazine)

March 30, 2005, ... process management. Visit booth 3752. IR Ink Drying System Is Improved Research Inc. , Eden Prairie, MN; 952/941-3300; researchinc.com The improved Model 5060 Speed-Dri ink drying system ...

Get Out of the Scroll Business

(Magazine)

February 27, 2005, ... Scroll-ville. Density changes in film or coatings. As a coating dries, it may shrink, pulling the web toward the drying side. Freshly made polymer films may shrink subtly in the first few hours after ...

CMM 2005 Exhibitors Listed by Product Categories

(Archive)

February 27, 2005, ...  DRYING & CURING (INCLUDING UV SUPPLIES & ACCESSORIES) Advance Systems, 4063 Bachofen + Meier, 3862 CMS, 4437 DKSH North America, 4633 Dri-Tec Mfg. Group, 2057 EIT Instrument Markets, 3837 ...

Hot Melt Adhesive Use

(Magazine)

February 27, 2005, ... In the case of hot melt products, this is especially true for application temperature. For a laminating adhesive, it might be crucial to follow the instructions for drying temperature; for a heat seal ...

Rotary Screen Printings Contribution to RFID

(Archive)

January 30, 2005, ...  The thickness of the antenna; The temperature and air pressure at which it is subjected in the drying chamber and the length of drying time; The temperature and length of time at which it is cured; ...