Blades

Show Preview | ICE USA 2017 Exhibits with InPrint USA in Orlando

(Trade Shows)

March 27, 2017, ... that are required in UV-cured inks. Flexo Concepts® (Booth #114) will introduce its latest doctor blade innovation, TruPoint Green. The new blade “bridges the gap” between UHMW and steel in mid-high ...

Universal Converting Reports Installations

(News | New Products)

March 03, 2017, ... for the life of the machine Automatic positioning of shear (knives and anvils) and razor blades Automatic positioning of rewind cores Additional slit tension zone The Universal X6 slitting machine ...

Pamarco to Exhibit at INFO*FLEX 2017

(News | New Products)

March 03, 2017, Company will feature EFlo technology, Absolute doctor blade systems, and Inometa composite components ATLANTA, GA | Pamarco, manufacturer of consumables for the printing industry, will be exhibiting ...

Shurtape Introduces Folded-Edge Hand Dispenser

(Label/Tape)

December 07, 2016, ... to produce tamper-evident seals. A retractable/pivoting safety blade that is shielded from accidental contact. A two-step process ensures the cutting blade is only exposed during deliberate cutting motion, ...

Goebel IMS & Achenbach Buschütteen Offer Foil Slitter

(Slit)

December 05, 2016, ... wrinkle-free material feeding even with the ultra-thin and extremely delicate aluminum foil. Different slitting systems such as slitting with razor blade tip or flat blade are said to guarantee maximum ...

TRESU Ink Supply System Said to Aid Print Quality

(Print)

November 14, 2016, ... automates circulation of ink, viscosity control, and cleaning of chamber doctor blade systems in central impression (CI) and inline flexo printing machines, thereby reducing material waste and operational ...

Web Lines | Unwind Splice Reliability

(Web Handling)

October 24, 2016, ... by the web tension from the expiring roll interfering with the serrated blade position. The blade must have the proper position into the web path to enable the cut. The blade must remain sharp and free ...

Gallus Announces New Label Press

(Label/Tape)

October 02, 2016, ... absolute register accuracy. A short web path of just 1.1 m from printing unit to printing unit is said to reduce waste, and an optimized ink duct for the chambered doctor blade needs just 250 g of ink ...

Fujifilm Press Has Automated Finishing Features

(News | New Products)

September 25, 2016, ... of the sheer slitting and back scoring by positioning blades based on preprogrammed positions. Also said to offer a higher level of accuracy. Provides servo-driven outfeed drive roller with nip; mounting ...

Flexo Concepts Showing MicroTip at Labelexpo

(News | New Products)

September 06, 2016, New MicroTip technology for the company’s TruPoint Orange doctor blade doctor blades is said to allow printers to customize metering PLYMOUTH, MA | Flexo Concepts will promote new MicroTips on its ...

Maxcess Reports Benefits of Tidland Electronic Knifeholders

(News | New Products)

August 29, 2016, New Control Series electronic knifeholders are said to deliver high slit quality, ease of use, and increased blade life CAMAS, WA | Maxcess, a global provider of products and services for web handling ...

Show Preview | Labelexpo Americas 2016 Offers Technology in Action

(Label/Tape)

August 08, 2016, ... Group (Booth 1308) will emphasize how its flexo ancillary solutions—including supply systems, chamber doctor blades, and chilling units—automatically regulate ink and coating circulation, thereby boosting ...

Uflex Launches Extrusion Lamination Machine

(Coating/Laminating)

July 26, 2016, ... Duty (Sturdy) structure; Motorized three-axis movement of carriage for air gap setting; Chamber-type doctor blade for anchor coating; T-Die with internal duckling and lip opening to 1 mm; Unique ...

AZCO Offers High-Speed Knife Assembly

(Carton Box)

July 09, 2016, The SMARTKNIFE, featuring two stationary blades for dual cuts, is said to offer easy installation and simplicity of use FAIRFIELD, NJ | AZCO Corporation offers the SMARTKNIFE modular knife assembly ...

Materials Handling | Pneumatic Conveyor Reduces Injuries, Cuts Waste

(Web Handling)

June 27, 2016, ... of two. The gravity diverter valve has a blade inside that switches from one direction to another, allowing material to be diverted to the appropriate tank. Still on a mezzanine level, the pellets are ...

EFI Launches New DFE Platform

(News | New Products)

June 26, 2016, ... the introduction of the new Fiery XB digital front end (DFE) platform for ultra-high-speed inkjet presses. Company says the Fiery XB platform, based on a high-performance, blade-based hardware architecture, ...

Maxson Sheeter Suited for Thermoform Industry

(Carton Box)

June 19, 2016, ... in an upper and lower rotating cylinders. The cylinders accelerate and decelerate during each revolution such that the peripheral speed of the blades and the speed of the web are equal at the cutting point ...

Nilpeter Press Is Suited for Many Uses

(News | New Products)

May 14, 2016, ... and special coatings. Reversible ink heads allow front or reverse-side printing. G-6 units have adjustable doctor blades, an ink circulation system, viscosity control, and a drying and vacuum system for ...

Show Preview | Focus on Industrial Printing at drupa 2016

(Print)

April 28, 2016, ... substrates, doctor blades, and anilox roll types as those used on the job, it provides a precise, predictable means of near-line proofing.    GSE Colorsat Compact ink dispenser     Harper ...

SAM Holds Inaugural Open House

(Coating/Laminating)

April 27, 2016, ... and hot melt coatings with a maximum width of 1,060 mm at 600 mpm (bypass speeds to 1,000 mpm). The line offers modular coating capabilities of slot die, micro gravure, pressurized chamber doctor blade, ...

Parkinson Technologies Reports Slitter/Rewinder

(News | New Products)

April 11, 2016, ... what company says is an ergonomic design providing easy/safe access to wound rolls and slitter blades. Slitting options include razor, shear, or score. Automatic blade positioning, laser core positioning, ...

Appleton Mfg. Division Adds to Safe-Slab Line

(News | New Products)

April 09, 2016, ... level of automation. Safety is enhanced by placing the blade and cutting area within an enclosure that requires no direct interaction from the operator during the slabbing process. Once the master roll ...

BOBST System Offers Selective Metallization

(Coating/Laminating)

February 03, 2016, ... doctor blade made out of carbon fiber allows a more efficient and accurate oil metering, company says. Other key features are said to include a cleaner selective metallization process; quick and easy ...

Show Preview | FTA’s 2016 Forum and INFO*FLEX

(Print)

February 01, 2016, ... the benefits of its TruPoint doctor blades in flexo printing applications. Visit booth to obtain a blade sample. President Kevin McLaughlin is one of five speakers at the “2016 Flexo Game Changers” Forum ...

POP Converter Adds XXL Paper Cutter

(Carton Box)

January 27, 2016, Lewisburg Printing orders Colter & Peterson 110-in. Saber PATERSON, NJ | After experiencing success with two prior cutting systems and preparing for future growth, company officials at Lewisburg Printing ...

Innovacera Offers Ceramic Cutters

(Die-Cutting)

November 20, 2015, Blades, knives, and cutters made from ceramic materials are made to order and said to offer benefits that include hardness and anti-static properties FUJIAN, CHINA | Innovacera, a manufacturer of technical ...

TRESU Group Launches Care Program

(News | New Products)

November 15, 2015, ... printing machines, and sealed, pressure-controlled chambered doctor blade systems said to enable direct, foam-free transfer of ink or coating medium to the anilox roll and fast changeover times. Also in ...

Maxson Sheeter Suited for High-Pressure Laminates

(News | New Products)

September 26, 2015, ... leading and trailing edge on thicknesses to 0.125 in. (3.2 mm) thick, without producing slivers. Using an exclusive clash adjustment, operator can adjust the cross cutting blades safely while the cutter ...

Web Lines | Air Bubbles in Your Laminate

(Web Handling)

August 31, 2015, ... In many operations, especially in the going “on coat” laminate bubbles, many operators learn to pierce the bubble with a cutting blade, whether in stabbing point cuts or longer air-relieving slits. It ...

Maxson Offers Knife Sharpening Service

(News | New Products)

August 30, 2015, ... surfaces (examine for excessive marring of knife seating surfaces) Using a CNC knife grinder, cross cutting blades are precision ground to ensure parallelism and edge retention, manually de-burred, and ...