Cores

DFW Tech Businesses Announce New Identity for Metroplex: "The RFID Hub

(Archive)

March 25, 2006, ... Hub, so the international business community recognizes that North Texas is a global center of RFID excellence,” says Bill Sproull, president and CEO of the MTBC. “This new RFID Hub identity underscores ...

Why Isn't Your Slitter Running

(Magazine)

December 30, 2005, ... the new cores. But the operators’ work doesn’t stop there; knife setups, unwind splicing, roll packaging, paperwork, etc., also take time. Operating a slitter can be divided into several categories: ...

A Perfect Match

(Magazine)

November 29, 2005, ... job that is going to run on a unique material, a special calibration adjustment may have to be made, but it’s not a daily requirement. DiGirolamo underscores the Prediction’s ease of operation: “It’s ...

New Products

(Magazine)

November 29, 2005, ... and increase productivity with repeated use of cores. Place Patches on a Moving Web Schober USA, Cincinnati, OH; 513/489-7393; schoberusa.com Cut & Place modules are for the transfer and placement ...

Need a Hand?

(Magazine)

November 29, 2005, ... and as the diameter of the roll of material varies, so does the ability to handle it properly. Other people handle it by the cores. The advantage is that you don’t touch the material when you handle it. ...

Slitting & Rewinding Fundamentals for Converters

(Archive)

October 31, 2005, ...  Trim Removal Slitting Dust Retrofitting Slitter/Winder Controls Web Tension and Tension Control Systems Cores and Core Cutting Safety and Core Chucks Air Shafts/Ergonomics Roll Handling Differential ...

Testing Machines

(Magazine)

October 30, 2005, ... with three scales for testing various paper stock, cores and corrugated, and baled scrap paper. A 0–100 arbitrary scale obtains relative moisture indications on other materials. This electrical resistance-type ...

Spellbound

(Magazine)

October 30, 2005, ...  Form & Function Impressive Labels, Safford, AZ, scores high honors for its HDM Tall Back Panel entry in the Flat Screen Printing category. Per the customer’s request, this label has to be 100% ...

First Glance

(Magazine)

September 29, 2005, ... scores, and moisture and stiffness levels. The information is presented in five languages. Called an ideal choice for luxury packaging, this GZ/SBS paperboard is said to offer exceptional whiteness, ...

New Products, Part 1

(Magazine)

September 29, 2005, ... storage while suspended end to end. Plugs are available to fit both 3- and 6-in. cores. Controller Indicates Tension The Montalvo Corp. , Gorham, ME; 800/226-8710; montalvo.com The DTI-3100ce ...

New Products, Part 2

(Magazine)

September 29, 2005, ... increasing productivity and product quality. No rewind mandrels are required. Cores simply are poured into a hopper/bowl feeder system and processed automatically. Cabinets are designed for quick and easy ...

CCTI Fall Meeting to Feature VTS Workshop

(Archive)

September 04, 2005, ... Subcommittee (VTS) workshop for manufacturers of tubes, cores, and composite cans. PRESS RELEASE ALEXANDRIA, VA—The Composite Can and Tube Institute (CCTI) will hold its 2005 Fall Meeting Sept. 27-29, ...

Reporter Clips

(Magazine)

August 30, 2005, ... direct.” Phoenix Challengers a Top Group CHARLOTTE, NC—A record number of students—38—earned the highest ever overall test scores this past April in math exams, prepress, press operation, platemaking, ...

New Products

(Magazine)

June 29, 2005, ... material. Autoloader transfers cores to the winding station automatically using a simple pick-and-place vacuum device. Rewind chucks then are activated to secure the cores in place during winding sequence. ...

Introduction to Roll Handling

(Magazine)

April 29, 2005, ...  Not well suited for roll weights over 2,000 lbs. Probe to core alignment is critical and can be difficult because of rigid probe mount May have trouble gripping metal or plastic cores Probe may ...

New Products

(Magazine)

April 29, 2005, ... leave dust on the cores and floor. User can run multiple width rolls on the same shaft, and each roll will always have the correct tension, company says. Manage Ink In-Line PAD Peripheral Advanced ...

Converting Industry News, Part 1

(Magazine)

March 30, 2005, ... four air rewind mandrels available to utilize cores with inside diameters from 1–3 in. and running speeds to 500 fpm. It includes closed loop tension control, a counter, web dividers, an auto roll eject ...

A King of Shrink Contender

(Flexpack)

March 30, 2005, ... duplex differential center winder can accommodate 3- or 6-in. cores, reaching speeds to 1,500 fpm at 350 lbs/shaft with the unwind taking 700 lbs fully cantilevered. The slip differential feature is especially ...

New Product Digest, Part 1

(Magazine)

March 30, 2005, ... group; fully automatic positioning of doctor blade; and fully enclosed printing unit. Visit booth 1034. PVC Cores are Durable Available Plastics, Huntsville, AL; 800/633-7212; duracore.net DuraCore ...

Brave New Slitting World

(Magazine)

February 27, 2005, With run speeds in excess of 600 meters per minute, set-up times down to mere minutes, and today’s technology of laser positioning knives and cores, turret rewinds, automatic discharge onto conveyors, ...

CMM 2005 Exhibitors Listed by Product Categories

(Archive)

February 27, 2005, ... 1668 EMT Intl., 3214 Goldenrod Corp., 775 Maxcess Intl., 1648 Nim-Cor, 1488 Powell Engineering, 1701 Profero Systems, 3116 Tidland Corp., 1648 CORES, PLUGS, CORE MACHINERY Abba Rubber Intl., ...

Waste Trimmed Away!

(Magazine)

February 27, 2005, ... it allows converters to use finer, narrower, less wasteful materials, eliminate cores, and even interface directly with an on-line recycling system. Waste matrix material can be transported up to 60 ...

New Products

(Magazine)

February 27, 2005, ... AirConvey, Newark, DE; 302/999-8000; precisionairconvey.com The PAC Model 30 roll splitter removes defective and/or out-of-spec material from cardboard cores automatically. Slices through stretch film, ...

New Product Digest, Part 2

(Magazine)

December 30, 2004, ... for high-speed slitting and winding of large-diameter rolls on small-diameter cores. The Advanced Technology SurfaStart (ATS) winds materials that can be surface-wound, including films, nonwovens, papers, ...

Who Likes Film?

(Magazine)

December 30, 2004, ... more diameter difference in rolls after slitting, causing problems with lock shaft and shared nip winding. Optimize tension, tension taper, and winding nip loads. Shorten roll length or increase cores ...

Web Tension 101

(Magazine)

November 29, 2004, ... zone. As a roll is rewound, each layer builds up compressive forces that can cause inner layers, toward the core, to buckle. Wrinkling, starring, and crushed cores will occur if these compressive forces ...

New Product Digest, Part 1

(Magazine)

November 29, 2004, ... CT; 860/599-1010; davis-standard.com The PAC 60 surface winder enables converters to wind 60-in.-dia rolls on 6-in. cores at speeds to 600 fpm. Said to be ideal for large roll mill operations where film ...

What's New in Narrow We

(Magazine)

October 30, 2004, ... system for on-demand digital label production. Said to be simple and compact, unit coats and cures labels to 6 in. wide and can accommodate rolls to 8 in. dia mounted on 3-in. cores. Includes a winder/rewinder. ...

St. Paul Coater Ups Release Liner Production after New Coating Line Install

(Archive)

September 16, 2004, ... states Rayven. Says Rayven president Joe Heinemann, "This major capital investment underscores Rayven's continued dedication to meeting the diverse needs of our customers." Heinemann adds the coater ...

Products

(Magazine)

July 30, 2004, ... modes — cores, coreless, or sheet stiffened. Accuracy of cut lengths is ±0.1 in. Trim Removal System Upgraded Converter Accessory Corp., Wind Gap, PA; 570/223-9867; handleyourweb.com FoxRunner portable ...