Doctor Blades

Coating Matters | Fluid Delivery System Design for Coating Control

(Coating/Laminating)

May 23, 2016, ... since 1996. Mark holds a Bachelor's degree in Chemical Engineering from the Univ. of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline ...

Nilpeter Press Is Suited for Many Uses

(News | New Products)

May 14, 2016, ... and special coatings. Reversible ink heads allow front or reverse-side printing. G-6 units have adjustable doctor blades, an ink circulation system, viscosity control, and a drying and vacuum system for ...

Show Preview | Focus on Industrial Printing at drupa 2016

(Print)

April 28, 2016, ... substrates, doctor blades, and anilox roll types as those used on the job, it provides a precise, predictable means of near-line proofing.    GSE Colorsat Compact ink dispenser     Harper ...

SAM Holds Inaugural Open House

(Coating/Laminating)

April 27, 2016, ... and hot melt coatings with a maximum width of 1,060 mm at 600 mpm (bypass speeds to 1,000 mpm). The line offers modular coating capabilities of slot die, micro gravure, pressurized chamber doctor blade, ...

Coating Matters | The Effects of Viscoelastic Behavior, Pt. 2

(Coating/Laminating)

April 25, 2016, ... of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultant and CEO of Coating Tech Service LLC. He ...

Parkinson Technologies Reports Slitter/Rewinder

(News | New Products)

April 11, 2016, The Dusenbery 280 center surface slitter/rewinder is said to be suited for many materials and for high- or low-volume operations WOONSOCKET, RI | Parkinson Technologies offers the new Dusenbery 280 ...

Appleton Mfg. Division Adds to Safe-Slab Line

(News | New Products)

April 09, 2016, The Butt Roll Safe-Slab and the Master Roll Safe-Slab are said to provide safe core recycling options for almost any roll material NEENAH, WI | Appleton Mfg. Division announces two new machines for ...

Coating Matters | Clean Coating and Fluid Preparation

(Coating/Laminating)

February 15, 2016, ... Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultant and CEO of Coating Tech Service LLC. He has worked in web coating technologies and chemical manufacturing operations and is a ...

BOBST System Offers Selective Metallization

(Coating/Laminating)

February 03, 2016, ... doctor blade made out of carbon fiber allows a more efficient and accurate oil metering, company says. Other key features are said to include a cleaner selective metallization process; quick and easy ...

Show Preview | FTA’s 2016 Forum and INFO*FLEX

(Print)

February 01, 2016, ... sleeve (seaming, inspection/doctoring, cutting/perforation); coating and lamianting, including narrow web solventless lamination; and slitting/rewinding, including narrow web widths.   Domino (Booth ...

POP Converter Adds XXL Paper Cutter

(Carton Box)

January 27, 2016, Lewisburg Printing orders Colter & Peterson 110-in. Saber PATERSON, NJ | After experiencing success with two prior cutting systems and preparing for future growth, company officials at Lewisburg Printing ...

Coating Matters | Considerations for Good Manufacturing Practice

(Coating/Laminating)

January 26, 2016, ... a Bachelor's degree in Chemical Engineering from the Univ. of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical ...

Innovacera Offers Ceramic Cutters

(Die-Cutting)

November 20, 2015, Blades, knives, and cutters made from ceramic materials are made to order and said to offer benefits that include hardness and anti-static properties FUJIAN, CHINA | Innovacera, a manufacturer of technical ...

TRESU Group Launches Care Program

(News | New Products)

November 15, 2015, ... printing machines, and sealed, pressure-controlled chambered doctor blade systems said to enable direct, foam-free transfer of ink or coating medium to the anilox roll and fast changeover times. Also in ...

Coating Matters | Optical Films Require Multiple Layers

(Coating/Laminating)

September 30, 2015, ...  degree in Chemical Engineering from the Univ. of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultan ...

Maxson Sheeter Suited for High-Pressure Laminates

(News | New Products)

September 26, 2015, The SDFK sheeter with its dual-knife rotary cutting action is said to improve productivity for HPL manufacturers WESTERLY, RI | Maxson Automatic Machinery Company reports high-pressure laminate (HPL) ...

Web Lines | Air Bubbles in Your Laminate

(Web Handling)

August 31, 2015, Here are 7 solutions when laminate bubbles or uncoated area creates delamination at idler rollers Here are 7 solutions when laminate bubbles or uncoated area creates delamination at idler rollers. ...

Maxson Offers Knife Sharpening Service

(News | New Products)

August 30, 2015, Company says it provide quick turnaround service for knives of all manufacturers WESTERLY, RI | Maxson Automatic Machinery Company offers a quick-response grinding service for sharpening sheeter cross ...

Show Preview | Labelexpo Europe 2015 Grows To Eight Halls

(Trends/Management)

August 18, 2015, ... doctor blade. MicroTip is a modified lamella tip that allows for a finer contact area with the anilox roll on mid-high line screens. The tip configuration combiend with a new generation polymer material ...

Coating Matters | Energy Storage Devices

(Coating/Laminating)

August 10, 2015, ... from the Univ. of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultant and CEO of Coating Tech ...

Show Preview | CPP Expo 2015 Adds 3D Printing Pavilion

(Trends/Management)

July 29, 2015, ... Also showcased will be information about company's chambered doctor blade systems, circulators, anilox rolls, web coaters, and more.   Heidelberg (Booth 857) will debut the Promatrix 106CS die-cutter ...

Flexo Printing | Mid-Web Press Answers Shift to More SKUs, Short Runs

(Print)

July 14, 2015, ... to input this information each time. There are three settings for light, medium, and heavy cleaning. Enclosed chamber doctor blade leakage is reduced through controlled chamber ink and cleaning pressure. ...

Coating Matters | Film Split Defects

(Coating/Laminating)

June 28, 2015, ... Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultant and CEO of Coating Tech Service LLC. He has worked in web coating technologies and chemical manufacturing operations and is a ...

Label PRomotion | Small Issues Add Up to Big Label Woes

(Label/Tape)

June 17, 2015, An aging population is just one factor that could lead to larger labels An Aging Population Is Just One Factor that Could Lead to Larger Labels When it comes to label type size, the eye doctor’s ...

Nordmeccanica Demonstrates Solvent-Free Adhesive Laminating

(Tom’s Poly Ploys)

June 07, 2015, Nordmeccanica's open house this week in Hauppauge, Long Island, NY, allowed me to witness the lamination of 5 micron (0.00020") aluminum foil to oriented polyester film via solventless lamination. Nordmeccanica ...

Coating Matters | The Effects of Viscoelastic Behavior, Pt. 1

(Coating/Laminating)

May 25, 2015, ... a Bachelor's degree in Chemical Engineering from the Univ. of Wisconsin-Madison and a Master's degree in Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical ...

Coating Matters | Pressure-Sensitive Adhesive Coating

(Coating/Laminating)

April 20, 2015, ... Polymer Science & Engineering from Lehigh Univ. and a Juris Doctor from Hamline Univ. Mark is a technical consultant and CEO of Coating Tech Service LLC. He has worked in web coating technologies and chemical ...

TRESU Launches Modular Press

(News | New Products)

April 14, 2015, A recent show in China was the occasion for the introduction of the modular ‘Concept’ and a carbon fibre chamber doctor blade   KOLDING, DENMARK | TRESU Group emphasized its capability as a total ...

Tidland Wins AIMCAL Tech Award

(News | New Products)

April 12, 2015, The 360 Degree Blade Guard, said to provide increased operator safety, wins the AIMCAL Technical Excellence Award   CAMAS, WA | Tidland, a global supplier of slitting and winding solutions for the ...

Show Preview | FTA’s 2015 Info*Flex and Forum in Perfect Harmony

(Print)

April 08, 2015, ... and maintenance by entering roll information to the interface. Flexo Concepts (Booth 232) will promote the benefits of its TruPoint doctor blades in flexo printing applications. Products are designed ...