Shafts

Static, Be Gone!

(Static-Beat)

October 31, 2009, ... rubber. Dissipating roller charge is important because charged roller surfaces attract dust particles, cause sparks to the grounded roller shafts, and may pose shock risks to personnel that clean the roller ...

WHAT'S NEW PRODUCT

(New Products)

September 30, 2009, ... come complete with air shafts and brakes or clutches, mounted. Converter Accessory Corp. | 800-433-2413 | www.converteraccessory.com Circle 400 or visit www.freeproductinfo.net/pff Stability ...

Narrow Web & Label Reporter

(Narrow Web)

June 30, 2009, ... both machines, operators benefit from not having to handle shafts at either end of the press. Martin Automatic | www.martinautomatic.com Circle 330 or visit www.freeproductinfo.net/pff Mark Andy ...

NEW PRODUCT DIGEST - May 2009

(New Products)

April 30, 2009, ... pneumatic differential shafts for both 3- and 6-in. cores. Has both razor and shear slitting, auto edge guide, laser core and knife positioning, automatic tension control, layon rolls, and the latest SSD ...

Surface Winder Is Reversible

(News Eclips)

March 03, 2009, ... heavy lifting. Handles rolls up to 1.5 m (4.9 ft) in diameter and film thickness from 15 to 400 microns (0.6 to 16 mil). Winding shafts are available in 76 mm (3 in.) and 152 mm (6 in.) sizes. Accommodates ...

What's New Products: March 200

(Magazine)

February 28, 2009, ... time. Tidland Corp. | 800-426-1000 | www.tidland.com PFFC-ASAP 403 Chucks Aid Roll Handling Fast-clamping air adapter chucks attach to existing shafts easily to securely accept rolls with ...

Unwind, Rewind Modules Improve Web Control

(News Eclips)

February 16, 2009, Converter Accessory Corp. introduces its SimpLok unwind and rewind modules designed to increase capacity WIND GAP, PA | Converter Accessory Corp. introduces its SimpLok unwind and rewind modules designed ...

Auto Gasket Laminator is Offered

(News Eclips)

February 16, 2009, ... adhesive unwind, and a 60-in. product rewind. All shaft locations feature safety chucks and air shafts; safety features include 18-in. light curtains prior to the nip as well as emergency stop switches ...

What's New Product

(New Products)

November 30, 2008, ... hole to let users re-machine them to match their own requirements. Collars can be re-bored and threaded to match the size of worn or replacement shafts; couplings allow for the effective mating of dissimilar-sized ...

What's New Product

(New Products)

October 31, 2008, ... technology and operate to handle core sizes from 2-18 in. dia. Said to be effective with virtually all types of air shafts and thru shafts. Reportedly, split bushing design clamps and releases quickly ...

Slitting & Rewinding Seminar at CPP Expo/PACK Expo

(News | New Products)

October 14, 2008, ... retrofitting, chucks, shafts, spreading, and guiding. The seminar is structured to be easily understood by those who are new to the industry, while providing advanced information to those with more experience. ...

Get a Grip

(Narrow Web)

September 30, 2008, ... in our holster,” explains Weber. Changing Shafts WCC's latest improvement in slitter speed and product quality was attained with a retrofit on a 63-in. Deacro 940D, which is unique because it can wind ...

Do You Have a Need for Speed?

(Web Lines)

September 30, 2008, ... brakes, and differential winding shafts generate heat proportional to the differential speed. At high speeds, these components won't have enough convective cooling, leading to thermal expansion and failure. ...

What's New Product

(Magazine)

September 30, 2008, ...  Sicpa | 703-455-8050 | www.sicpa.com PFFC-ASAP 401 Shaft Collars Assembly Is Simplified Expanded line of hinged shaft collars is now offered in various bore styles to match different types of shafts. ...

Idler Roller Bearings: Living the Good Long Life?

(Web Lines)

June 30, 2008, ... is the bearing needs to have an inner diameter bigger than your shaft and outer diameter smaller than the roller's shell. On the plus side, larger idler shafts will have less deflection, but larger bearings ...

What's New Product

(New Products)

June 30, 2008, ... quickly without special tools for nonslip holding of tools and rolls on smooth, case-hardened shafts. Quick-release feature facilitates frequent changeovers to help reduce downtime and maintain high production ...

What's New Product

(New Products)

May 31, 2008, ... Shafts Safely The Bulldog medium-weight, low-profile Shaft-Lok shaft holder system for unwind and rewind rolls has no pinch points, which is said to offer a high level of worker safety. Designed for loads ...

What's New Product

(Magazine)

April 30, 2008, ... production of coreless products. Standard shafts in sizes between 1.75 and 3.5 in. and rewind diameters to 18 in. are available. For surface winding, the model uses a special rewind shaft that works in ...

Drupa New Product Digest

(Magazine)

April 30, 2008, ... rolls to 1,000 mm dia and rewinds finished rolls to 600 mm dia. Options include differential rewind shafts, computerized control system through touchscreen operator panel with easy setting systems, laser ...

Shaft Collar

(Archive)

March 12, 2008, EasyLock shaft collars from Amacoil/Uhing install quickly without special tools for non-slip holding of tools and reels on smooth, case hardened (Rockwell 55 or higher) shafts. ASTON, PA | EasyLock shaft ...

TOP 10 EClips PFFC's electronics clipping service for converter

(New Products)

February 29, 2008, ... dia mounted on cantilevered air shafts. Individual unwind tension is controlled through an ultrasonic diameter measurement feedback system. Independent Machine Co. | 973-882-0060 | www.independentusa.com ...

What's New Product

(New Products)

February 29, 2008, ... | www.justnormlicht.com PFFC-ASAP 411 Roll Alignment Kit Offered Kit facilitates the alignment of rollers, shafts, and web-handling systems. A digital receiver and display provide readings of roller ...

Fundamentals for Converters

(News | New Products)

February 25, 2008, ... nonwovens, and other continuous flexible materials and the processes of winding, slitting, cores and cutting, retrofitting chucks, shafts, spreading, and guiding. Beginners as well as experienced personnel ...

Shaft Locking System

(News | New Products)

February 04, 2008, ... safely operated shaft holder system for unwind and rewind rolls. Shaft-Lok has not pinch points, and the Bulldog series is designed for loads up to 3,000 lbs. and one-inch shafts. In all sizes, the ...

Roll Winding Dynamics

(Web Handling)

January 31, 2008, ... as possible between knives and rewind so that the web is maintained at a constant distance throughout diameter build up. The differential system and cantilevered rewind shafts also facilitate ease of loading/unloading. ...

Differential Winding Limits: Part II

(Magazine)

November 30, 2007, Differential shafts are great tools, but like any tool, they have their limitations. Last month I covered the complexity of a differential shaft's actual Differential shafts are great tools, but like any ...

Two-Roll Heated Laminator with Unwind/Rewind

(Archive)

November 25, 2007, ... roll. The six-station unwind section accommodates 270 mm-650 mm wide x 600 mm diameter rolls mounted on cantilevered air shafts. Individual unwind tension is controlled through an ultrasonic diameter measurement ...

Slitting & Rewinding Fundamentals for Converters

(Archive)

November 06, 2007, ... shafts, spreading, and guiding. The seminar is structured to be easily understood by those who are new to the industry, while providing advanced information to those with more experience. Q&A sessions ...

New Products, Part 2

(Archive)

November 06, 2007, ... Varimatrix 105 unit for die-cutting and embossing is said to be economical and to produce high quality. All stations have their own drive, and all drive shafts are connected to a maintenance-free timing ...

Differential Winding Limits: Part I

(Web Lines)

October 31, 2007, ... starting in November 2002 at pffc-online.com/web_lines. Differential shafts in all their varied designs are a great invention. They are the “sliced bread” of slitter/rewinding operations. However, what ...