Blades

Drupa New Product Digest

(Magazine)

April 30, 2008, ... blades; automatic correction of printing pressure at print speed change; and automatic setting of registers and printing pressure at job startup. Visit Hall 3, Stand E04. Uteco Group | 770-427-4100 ...

W&H to Debut CI Flexo Press at Interpack 2008

(News | New Products)

April 06, 2008, ... improvements, such as sleeve-type nip rolls and light-weight doctor blade chambers, highlight this new development. The MIRAFLEX C is available with 8 or 10 color decks and printing widths of 39-in. to ...

Shrinkable Film/Label Inks

(Archive)

March 12, 2008, ... reportedly include good film adhesion, printability at high speeds, good doctor blade wiping, high strength, resolubility, heat resistance, scratch and scuff resistance, blocking resistance, and clean ...

Property Control

(Coating/Laminating)

January 31, 2008, ...  Slide 3,000-120,000 Gravure, reverse 40,000-1,000,000 Gravure, forward 10-1,000 Slot die 3,000-100,000 Curtain 10,000-1,000,000 Blade 20-40,000 Ancillary Operations Simple ...

February What's Ne

(Magazine)

January 31, 2008, ... roller coater with enclosed doctor blade; web widths of 13 or 20 in.; quick-change magnetic die cylinder; two-knife system for underscore (additional knives optional); and three-knife slitting system. ...

Coating & Laminating Services Directory 2008

(Archive)

January 31, 2008, ...  2 Brush 21 Nonwovens 3 Coextrusion 22 Plastic Films 4 Doctor Blade 23 Paperboard 5 Extrusion 24   Electrostatic 25 Coating Type Gravure 26 ...

February Products

(Magazine)

January 31, 2008, ... the hole cutout and requiring no expensive replacement blades. System is available for any of the standard hanger hole, handle hole, or tear notch shapes. Park Air Converting Solutions | 800-799-8319 ...

Roll Winding Dynamics

(Web Handling)

January 31, 2008, ... if a slitter blade is allowed to move. A bottom slitter blade, for example, if allowed to wobble, will cause the edge to be cut into a scallop. This scalloped slit edge then will wind up at speed to produce ...

Dust Removal for Slitter Section

(News | New Products)

January 21, 2008, ... papers, eliminating debris buildup caused by the slitting action. Sheet metal bonnets enclose all but the contact edge of the top slitter blade and bottom slitter ring. Flexible hosing from each slitter ...

Picking Up the Pace

(Web Handling)

December 31, 2007, ... handle different substrates. Recent introductions include the all-electronic e-Knifeholder from Tidland that self-calibrates to optimize blade geometry during setup, blade overlap, and side-force; the ...

Products

(New Products)

December 31, 2007, ... shear cutting processes. Comes with optional razor cut units or used with standard knife holders and blades. Converter Accessory Corp. | 800-433-2413 | www.handleyourweb.com PFFC-ASAP 417 Protect ...

CorrExpo Keeps Boxmakers in the Race

(Magazine)

November 30, 2007, ... Maintenance and Corrugating/Corrugating Maintenance tracks. Attendees heard presentations by, among others, Jean Jackson, Allison Systems, who provided information on doctor blades and how they react with ...

PFFC Pilot/Lab/Technical Facilities Directory

(Magazine)

November 30, 2007, ... floater; 3 zones; UV curing; solvents: water, flammable, organic Coating Techniques | doctor blade, forward roll, gravure, hot melt, reverse roll, rod, slot die Substrates | film (0.510 mil); foil (0.512 ...

Cleaning Solution Is Safe

(Archive)

November 08, 2007, ... company reports. Suited for the removal of UV, solvent, and water-based inks and coatings from anilox rolls, plates, doctor blades, printing presses, and more. Can be applied to rolls and plates on-press. ...

New Products, Part 2

(Archive)

November 06, 2007, ... company reports. Suited for the removal of UV, solvent, and water-based inks and coatings from anilox rolls, plates, doctor blades, printing presses, and more. Can be applied to rolls and plates on-press. ...

A Paradise of Print

(Tapes)

October 31, 2007, ... be used as a decorative and collectible sticker. Die-cutting is done in one pass. One blade must be sufficient to cut the inner circle without cutting through the second layer of material. Meanwhile, ...

New Products, Part 1

(Magazine)

October 31, 2007, ... | PFFC-ASAP 401 Modules Add To Blade Life Cut & Place modules are for the transfer and placement of pre-cut patches onto a continuously moving web. High-speed technology features vibration-free design ...

CCP Expo 2007 Exhibitors

(Archive)

October 22, 2007, ... Corporation Siemens Energy and Automation Sigmala Limited Simco Industrial Static Control SKC Inc. Spartanics Specialty Blades Stork Cellramic, Inc. Stratis Pallets Takk Industries Terphane, ...

2008 TAPPI Coating & Graphic Arts Conference Call for Papers

(Archive)

October 08, 2007, ... in 2010 and beyond. Green chemistries. Renewable raw materials (pigments, binders, or additives). Nano materials (pigments, binders, or additives). Dry coating. Barrier coating. Blade scratch reduction. ...

WHAT'S NE

(Magazine)

August 31, 2007, ... more. Cutting rate and rotational speed of material and blade are set and controlled automatically via the PLC. Design feature stops the buildup of any sticky waste material in cutting section. Featured ...

News Clips

(Magazine)

August 31, 2007, ... decks, anilox rolls, and doctor blade chamber and is suited for both solvent- and water-based inks. “The press is designed to print top quality product at high line speeds, while allowing for fast job ...

Conversource Releases Flexographic Supplies Catalog

(Archive)

August 04, 2007, ... of consumable supplies and accessory equipment for the pressroom. Conversource features plate mounting tapes from 3M, tesa tape, Harley, and Adhesographics. Conversource stocks doctor blades, tint sleeves, ...

WHAT'S NE

(Magazine)

July 31, 2007, ... and handle film widths to 54 in. in single-lane configuration and 26-in. film width for split lane configuration. PFFC-ASAP 401 Blade Holders Cut Downtime Allison Systems Corp., Riverside, NJ; ...

New Products

(Magazine)

June 30, 2007, ...  Rewind System Aids Productivity Proslit/Comexi Group, Girona, Spain; +34 972 477 744; proslit.com The Eikon slitter/rewinder features an automatic blade and counter-blade laser positioning system, ...

Narrow Web & Label Reporter

(Magazine)

June 29, 2007, ... be especially recommended for blade servers and other metal-surfaced assets or liquid storage containers. Two Industry Sales CHICAGO, IL—Mesirow Financial reports it served as advisor in two recent ...

Remove Reel Bands Without Damaging Stock

(Archive)

June 10, 2007, ... clean up a butt roll by safely stripping off only the unusable plies of surface stock. When its used in place of a steel-bladed knife to open or clean a roll, the durable and purpose shaped tool won't cut, ...

Schiavi Press Part of CMM Flex Pack Tech Center

(Flexpack)

May 09, 2007, ... Rosemont Convention Center, IL. The EF 5060 to be demonstrated on the show floor is the latest design in the Schiavi EF 50 flexo press series. It is equipped with pneumatic self-adapting doctor blades, ...

New Product Digest

(Magazine)

April 30, 2007, ... feature a low-inertia design for high speeds on short cutoffs yet permit knife loading to 1,000 lbs/3300 ft2. Speeds to 1,300 fpm can be achieved. Company says blade adjustment clamps allow fine-tuning ...

Converter Clips

(Magazine)

March 31, 2007, ... core cutter; and the Great White fully programmable core cutter. Also acquired were the US patents for the ratcheting knife blade and the dual-mandrel core cutters, available in most models. Leybold ...

Reader's Choic

(Magazine)

February 28, 2007, ... Doctor Blades Outlast Steel TruPoint UltraFlex doctor blades are engineered from a thin-weave fiberglass composite material said to provide the same level of stiffness as a steel doctor blade while increasing ...